Automatically update your drivers. Documents for Intel® PRO/Wireless 2100 Network Connection. The CD for the Intel® PRO/Wireless 2011B LAN PCI Adapter. ![]() If you do not have a USB cable, you can configure your Brother machine from the machine's control panel manually. Before configuring the wireless settings: You must know your wireless network settings of the WLAN access point/router. Check and record the current wireless network settings below. • Network Name (SSID: Service Set ID, ESSID: Extended Service Set ID) • Network Key (Password, Security Key or Encryption Key, etc.) Your Brother machine supports the use of the first WEP KEY only. If you are using a router that is using more than one WEP KEY, enter the KEY used for the first WEP KEY. How to find the Network Name (SSID, ESSID) and Network Key • See the side of your WLAN access point/router. • See the documentation provided with your WLAN access point/router. • The initial Network Name could be the manufacturer's name or the model name. If you don't know your wireless settings of your WLAN access point/router, Configure the wireless settings: Follow the steps below. NOTE: The screens may differ depending on operating system being used and your Brother machine. • Connect the AC power cord to your Brother machine and then connect it to an AC power outlet (electrical socket). Turn on your Brother machine. If you do not have the CD-ROM: (Windows) Go to Downloads section of this website and download Full Driver & Software Package. First, follow the installation instructions on the download page. Once the installation screen appears, follow the steps from STEP c for Windows users below. (Macintosh) Go to Downloads section of this website and download Full Driver & Software Package. First, follow the installation instructions on the download page. Once the installation screen appears, follow the steps from STEP c for Macintosh users below. For Windows users. • The screen for choosing your Brother machine may appear. If the screen does not appear, Check if your Brother machine appears in the list on the screen. If you cannot find your Brother machine from the list, click Wireless Setup to configure the wireless settings.. ![]() If you can find your Brother machine, choose your Brother machine from the list. Then click Next and follow the on-screen instructions to install the printer driver for network connection. Even if you have printed with USB connection, you need to install the printer driver for network connection. • The screen for choosing your Brother machine may appear. If the screen does not appear,. Check if your Brother machine appears in the list on the screen. If you cannot find your Brother machine from the list, click (Setup) > Wireless Device Setup Wizard to configure the wireless settings.. If you can find your Brother machine, choose your Brother machine from the list. Then click Next and follow the on-screen instructions to install the printer driver for network connection. Even if you have printed with USB connection, you need to install the printer driver for network connection. • The Installation confirmation screen may appear. If the screen does not appear,. If this screen appears, you can configure your Brother machine for a wireless network using the Wireless setup wizard without USB cable. (The computer must be on your network.) Confirm the message on the screen. Check the Checked and confirmed box and click Next. Follow the on-screen instructions to configure your Brother machine for a wireless network and install the printer driver for network connection. Even if you have printed with USB connection, you need to install the printer driver for network connection. • Choose Yes, I have a USB cable to use for installation. And then click Next. • Your wireless settings will automatically be detected. One of the following screens will appear depending on your computer environment being used. If 'Installation confirmation' screen appears: Confirm the displayed information. Check the Checked and confirmed box and click Next. Your Network Name (SSID, ESSID) will be displayed. Choose Yes and then click Next.. If 'Available Wireless Networks' screen appears: The list of currently available wireless network will be displayed. Choose the Network Name (SSID, ESSID) you would like to connect to and then click Next.. F the Network Name (SSID, ESSID) is not displayed in the list,. • If the Network Name (SSID, ESSID) is not displayed in the wireless network list, confirm the following: After you confirm, click Refresh. • If the WLAN access point/router is turned off, turn on it. • If your Brother machine is placed too far from your WLAN access point/router or there are obstructions between them, place the Brother machine as close to the WLAN access point/router as possible with minimal obstructions. • Your Brother machine supports IEEE 802.11b, IEEE 802.11g and IEEE 802.11n. Confirm if your WLAN access point/router supports IEEE 802.11b, IEEE 802.11g or IEEE 802.11n, and if one of them is enabled. This screen will appear if you choose the Network Name (SSID, ESSID) of the unsecured WLAN access point/router.
0 Комментарии
Оставить ответ. |
АвторНапишите что-нибудь о себе. Не надо ничего особенного, просто общие данные. Архивы
Март 2019
Категории |